Driver fatigue monitor with signal output 45km/h start-up speed
Description
With a unique pupil identification technology, the Driver Fatigue Monitoring System can accurately detect a driver’s fatigue and distraction state in all weather conditions and provide an early warning for real fatigue or any form of distraction. This will help prevent accidents in a timely manner and ensure driver safety.
Here, we will have a look at its features:
Keep an eye on vehicles and driver behaviors
Alert drivers upon detecting drowsiness
Easy to install
Driver fatigue reports
Power input and output
| Input | 9-36V |
| power consumption | 100mA in 12V car, and 60mA in 24V car |
| I/O output | high resistance status under normal status, low voltage output when triggered |
| Working Temprature: | 0-80℃ |
| Working Humility: | 10%-90% |
| Weigh: | 108g |
| Demension: | 4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm
Attention:
Non-authorized person, please do not open or repair the device.
Please do not operate the system when driving to avoid dangerous
Please handle carefully, do not drop or impact with hard objectives
Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.
keep it away from water or moist place, device will be rusted or shortcut in those area.
Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.
Product Tags:
|
|
Driver Fatigue Warning System For Transport Safety 45km / H Start Up Speed Images
|
