Driver fatigue monitor with signal output 45km/h start-up speed
Description
Some drivers alert systems use complex algorithms to differentiate between intentional movements and the sort of drifting and jerky steering typically associated with a fatigued driver. Other systems have sensitivity controls that the driver can adjust, and most can be switched of manually.
In addition to monitoring the way that a car is being driven, some drivers alert systems can also monitor the driver by looking for signs of drooping eyelids, slackened facial muscles, or other telltale signs of drowsiness.
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
Power input and output
| Input | 9-36V |
| power consumption | 100mA in 12V car, and 60mA in 24V car |
| I/O output | high resistance status under normal status, low voltage output when triggered |
| Working Temprature: | 0-80℃ |
| Working Humility: | 10%-90% |
| Weigh: | 108g |
| Demension: | 4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm
Product Tags:
|
|
Driver Safety Monitor Anti Sleep System Alarm With Signal Output 45km / H Images
|
